Я читаю здесь Узнать C до Objective-C?
Обычно я заменяю некоторый код Obj-C чистым C-кодом (ведь вы можете смешивать их столько, сколько хотите, содержимое Obj-C-метода может быть полностью, чистым C-кодом)
Это правда?
Можно ли создать приложение для iPhone исключительно на языке программирования C?
Черт, мне потребовалось некоторое время, но я понял:
main.c:
#include <CoreFoundation/CoreFoundation.h>
#include <objc/runtime.h>
#include <objc/message.h>
// This is a hack. Because we are writing in C, we cannot out and include
// <UIKit/UIKit.h>, as that uses Objective-C constructs.
// however, neither can we give the full function declaration, like this:
// int UIApplicationMain (int argc, char *argv[], NSString *principalClassName, NSString *delegateClassName);
// So, we rely on the fact that for both the i386 & ARM architectures,
// the registers for parameters passed in remain the same whether or not
// you are using VA_ARGS. This is actually the basis of the objective-c
// runtime (objc_msgSend), so we are probably fine here, this would be
// the last thing I would expect to break.
extern int UIApplicationMain(int, ...);
// Entry point of the application. If you don't know what this is by now,
// then you probably shouldn't be reading the rest of this post.
int main(int argc, char *argv[])
{
// Create an @autoreleasepool, using the old-stye API.
// Note that while NSAutoreleasePool IS deprecated, it still exists
// in the APIs for a reason, and we leverage that here. In a perfect
// world we wouldn't have to worry about this, but, remember, this is C.
id autoreleasePool = objc_msgSend(objc_msgSend(objc_getClass("NSAutoreleasePool"), sel_registerName("alloc")), sel_registerName("init"));
// Notice the use of CFSTR here. We cannot use an objective-c string
// literal @"someStr", as that would be using objective-c, obviously.
UIApplicationMain(argc, argv, nil, CFSTR("AppDelegate"));
objc_msgSend(autoreleasePool, sel_registerName("drain"));
}
AppDelegate.c:
#import <objc/runtime.h>
#import <objc/message.h>
// This is equivalent to creating a @class with one public variable named 'window'.
struct AppDel
{
Class isa;
id window;
};
// This is a strong reference to the class of the AppDelegate
// (same as [AppDelegate class])
Class AppDelClass;
// this is the entry point of the application, same as -application:didFinishLaunchingWithOptions:
// note the fact that we use `void *` for the 'application' and 'options' fields, as we need no reference to them for this to work. A generic id would suffice here as well.
BOOL AppDel_didFinishLaunching(struct AppDel *self, SEL _cmd, void *application, void *options)
{
// we +alloc and -initWithFrame: our window here, so that we can have it show on screen (eventually).
// this entire method is the objc-runtime based version of the standard View-Based application launch code, so nothing here really should surprise you.
// one thing important to note, though is that we use `sel_getUid()` instead of @selector().
// this is because @selector is an objc language construct, and the application would not have been created in C if I used @selector.
self->window = objc_msgSend(objc_getClass("UIWindow"), sel_getUid("alloc"));
self->window = objc_msgSend(self->window, sel_getUid("initWithFrame:"), (struct CGRect) { 0, 0, 320, 480 });
// here, we are creating our view controller, and our view. note the use of objc_getClass, because we cannot reference UIViewController directly in C.
id viewController = objc_msgSend(objc_msgSend(objc_getClass("UIViewController"), sel_getUid("alloc")), sel_getUid("init"));
// creating our custom view class, there really isn't too much
// to say here other than we are hard-coding the screen bounds,
// because returning a struct from a `objc_msgSend()` (via
// [[UIScreen mainScreen] bounds]) requires a different function call
// and is finicky at best.
id view = objc_msgSend(objc_msgSend(objc_getClass("View"), sel_getUid("alloc")), sel_getUid("initWithFrame:"), (struct CGRect) { 0, 0, 320, 480 });
// here we simply add the view to the view controller, and add the viewController to the window.
objc_msgSend(objc_msgSend(viewController, sel_getUid("view")), sel_getUid("addSubview:"), view);
objc_msgSend(self->window, sel_getUid("setRootViewController:"), viewController);
// finally, we display the window on-screen.
objc_msgSend(self->window, sel_getUid("makeKeyAndVisible"));
return YES;
}
// note the use of the gcc attribute extension (constructor).
// Basically, this lets us run arbitrary code before program startup,
// for more information read here: http://stackoverflow.com/questions/2053029
__attribute__((constructor))
static void initAppDel()
{
// This is objc-runtime gibberish at best. We are creating a class with the
// name "AppDelegate" that is a subclass of "UIResponder". Note we do not need
// to register for the UIApplicationDelegate protocol, that really is simply for
// Xcode autocomplete, we just need to implement the method and we are golden.
AppDelClass = objc_allocateClassPair(objc_getClass("UIResponder"), "AppDelegate", 0);
// Here, we tell the objc runtime that we have a variable named "window" of type 'id'
class_addIvar(AppDelClass, "window", sizeof(id), 0, "@");
// We tell the objc-runtime that we have an implementation for the method
// -application:didFinishLaunchingWithOptions:, and link that to our custom
// function defined above. Notice the final parameter. This tells the runtime
// the types of arguments received by the function.
class_addMethod(AppDelClass, sel_getUid("application:didFinishLaunchingWithOptions:"), (IMP) AppDel_didFinishLaunching, "[email protected]:@@");
// Finally we tell the runtime that we have finished describing the class and
// we can let the rest of the application use it.
objc_registerClassPair(AppDelClass);
}
View.c
#include <objc/runtime.h>
// This is a strong reference to the class of our custom view,
// In case we need it in the future.
Class ViewClass;
// This is a simple -drawRect implementation for our class. We could have
// used a UILabel or something of that sort instead, but I felt that this
// stuck with the C-based mentality of the application.
void View_drawRect(id self, SEL _cmd, struct CGRect rect)
{
// We are simply getting the graphics context of the current view,
// so we can draw to it
CGContextRef context = UIGraphicsGetCurrentContext();
// Then we set it fill color to white so that we clear the background.
// Note the cast to (CGFloat []). Otherwise, this would give a warning
// saying "invalid cast from type 'int' to 'CGFloat *', or
// 'extra elements in initializer'. Also note the assumption of RGBA.
// If this wasn't a demo application, I would strongly recommend against this,
// but for the most part you can be pretty sure that this is a safe move
// in an iOS application.
CGContextSetFillColor(context, (CGFloat []){ 1, 1, 1, 1 });
// here, we simply add and draw the rect to the screen
CGContextAddRect(context, (struct CGRect) { 0, 0, 320, 480 });
CGContextFillPath(context);
// and we now set the drawing color to red, then add another rectangle
// and draw to the screen
CGContextSetFillColor(context, (CGFloat []) { 1, 0, 0, 1 });
CGContextAddRect(context, (struct CGRect) { 10, 10, 20, 20 });
CGContextFillPath(context);
}
// Once again we use the (constructor) attribute. generally speaking,
// having many of these is a very bad idea, but in a small application
// like this, it really shouldn't be that big of an issue.
__attribute__((constructor))
static void initView()
{
// Once again, just like the app delegate, we tell the runtime to
// create a new class, this time a subclass of 'UIView' and named 'View'.
ViewClass = objc_allocateClassPair(objc_getClass("UIView"), "View", 0);
// and again, we tell the runtime to add a function called -drawRect:
// to our custom view. Note that there is an error in the type-specification
// of this method, as I do not know the @encode sequence of 'CGRect' off
// of the top of my head. As a result, there is a chance that the rect
// parameter of the method may not get passed properly.
class_addMethod(ViewClass, sel_getUid("drawRect:"), (IMP) View_drawRect, "[email protected]:");
// And again, we tell the runtime that this class is now valid to be used.
// At this point, the application should run and display the screenshot shown below.
objc_registerClassPair(ViewClass);
}
Это уродливо, но оно работает.
Если вы хотите скачать это, , вы можете получить его из моего dropbox здесь
Вы можете получить его из моего репозитория GitHub здесь:
Objective-C является надмножеством C-языка, поэтому теоретически возможно написать программу целиком на C, однако, если вы не полностью разбираетесь в OpenGL ES, вам нужно будет сделать как минимум some objC (Даже богатый образец имеет const NSString * в нем), иначе вам придется сами писать представления.
ОК, вышеуказанное полностью неверно. Позвольте мне сказать, я поражен, что Rich достиг этой высокой цели, поэтому я перенес ее в mac (источник здесь). В приведенных ниже файлах нет заголовков, не ссылаются на Cocoa, и у проекта нет нити:
AppDelegate.m
#include <objc/runtime.h>
#include <objc/message.h>
extern id NSApp;
struct AppDel
{
Class isa;
//Will be an NSWindow later, for now, it id, because we cannot use pointers to ObjC classes
id window;
};
// This is a strong reference to the class of the AppDelegate
// (same as [AppDelegate class])
Class AppDelClass;
BOOL AppDel_didFinishLaunching(struct AppDel *self, SEL _cmd, id notification) {
//alloc NSWindow
self->window = objc_msgSend(objc_getClass("NSWindow"),
sel_getUid("alloc"));
//init NSWindow
//Adjust frame. Window would be about 50*50 px without this
//specify window type. We want a resizeable window that we can close.
//use retained backing because this thing is small anyhow
//return no because this is the main window, and should be shown immediately
self->window = objc_msgSend(self->window,
sel_getUid("initWithContentRect:styleMask:backing:defer:"),(NSRect){0,0,1024,460}, (NSTitledWindowMask|NSClosableWindowMask|NSResizableWindowMask|NSMiniaturizableWindowMask),NSBackingStoreRetained,NO);
//send alloc and init to our view class. Love the nested objc_msgSends!
id view = objc_msgSend(objc_msgSend(objc_getClass("View"), sel_getUid("alloc")), sel_getUid("initWithFrame:"), (struct CGRect) { 0, 0, 320, 480 });
// here we simply add the view to the window.
objc_msgSend(self->window, sel_getUid("setContentView:"), view);
objc_msgSend(self->window, sel_getUid("becomeFirstResponder"));
//makeKeyOrderFront: NSWindow to show in bottom left corner of the screen
objc_msgSend(self->window,
sel_getUid("makeKeyAndOrderFront:"),
self);
return YES;
}
static void initAppDel()
{
//Our appDelegate should be NSObject, but if you want to go the hard route, make this a class pair of NSApplication and try initing those awful delegate methods!
AppDelClass = objc_allocateClassPair((Class)
objc_getClass("NSObject"), "AppDelegate", 0);
//Change the implementation of applicationDidFinishLaunching: so we don't have to use ObjC when this is called by the system.
class_addMethod(AppDelClass,
sel_getUid("applicationDidFinishLaunching:"),
(IMP) AppDel_didFinishLaunching, "[email protected]:@");
objc_registerClassPair(AppDelClass);
}
void init_app(void)
{
objc_msgSend(
objc_getClass("NSApplication"),
sel_getUid("sharedApplication"));
if (NSApp == NULL)
{
fprintf(stderr,"Failed to initialized NSApplication... terminating...\n");
return;
}
id appDelObj = objc_msgSend(
objc_getClass("AppDelegate"),
sel_getUid("alloc"));
appDelObj = objc_msgSend(appDelObj, sel_getUid("init"));
objc_msgSend(NSApp, sel_getUid("setDelegate:"), appDelObj);
objc_msgSend(NSApp, sel_getUid("run"));
}
//there doesn't need to be a main.m because of this little beauty here.
int main(int argc, char** argv)
{
//Initialize a valid app delegate object just like [NSApplication sharedApplication];
initAppDel();
//Initialize the run loop, just like [NSApp run]; this function NEVER returns until the app closes successfully.
init_app();
//We should close acceptably.
return EXIT_SUCCESS;
}
View.m
#include <objc/runtime.h>
#include <objc/message.h>
#include <ApplicationServices/ApplicationServices.h>
// This is a strong reference to the class of our custom view,
// In case we need it in the future.
Class ViewClass;
// This is a simple -drawRect implementation for our class. We could have
// used a UILabel or something of that sort instead, but I felt that this
// stuck with the C-based mentality of the application.
void View_drawRect(id self, SEL _cmd, CGRect rect)
{
//make a red NSColor object with its convenience method
id red = objc_msgSend(objc_getClass("NSColor"), sel_getUid("redColor"));
// fill target rect with red, because this is it!
NSRect rect1 = NSMakeRect ( 21,21,210,210 );
objc_msgSend(red, sel_getUid("set"));
NSRectFill ( rect1 );
}
// Once again we use the (constructor) attribute. generally speaking,
// having many of these is a very bad idea, but in a small application
// like this, it really shouldn't be that big of an issue.
__attribute__((constructor))
static void initView()
{
// Once again, just like the app delegate, we tell the runtime to
// create a new class, this time a subclass of 'UIView' and named 'View'.
ViewClass = objc_allocateClassPair((Class) objc_getClass("NSView"), "View", 0);
// and again, we tell the runtime to add a function called -drawRect:
// to our custom view. Note that there is an error in the type-specification
// of this method, as I do not know the @encode sequence of 'CGRect' off
// of the top of my head. As a result, there is a chance that the rect
// parameter of the method may not get passed properly.
class_addMethod(ViewClass, sel_getUid("drawRect:"), (IMP) View_drawRect, "[email protected]:");
// And again, we tell the runtime that this class is now valid to be used.
// At this point, the application should run and display the screenshot shown below.
objc_registerClassPair(ViewClass);
}
prefix.pch
//
// Prefix header for all source files of the 'CBasedMacApp' target in the 'CBasedMacApp' project
//
#ifdef __OBJC__
#import <Foundation/Foundation.h>
#import <AppKit/AppKit.h>
#endif
Я читаю здесь Узнать C до Objective-C?
Обычно я заменяю некоторый код Obj-C чистым C-кодом (ведь вы можете смешивать их столько, сколько хотите, содержимое Obj-C-метода может быть полностью, чистым C-кодом)
Это правда?
Могу ли я создать приложение для iPhone исключительно на языке программирования C?
Процитированный отрывок верен, но ответ на ваш вопрос - нет.
Чтобы проиллюстрировать, что ответчик Мекки говорил по этому другому вопросу:
- (void) drawRect:(CGRect)dirtyRect { //Objective-C
CGContextRef context = UIGraphicsGetCurrentContext(); //C
CGContextSetRGBFillColor(context, 1.0, 0.0, 0.0, 1.0); //C
CGContextFillRect(context, dirtyRect); //C
} //Objective-C (balances above "- (void) drawRect:…" line)
В этом методе нет ничего, кроме чистого кода C, но сам метод Objective-C code, также как и класс, содержащий этот метод.
Итак, можно сделать то, что сказал Мекки, но вы не можете (практически, как показал Ричард Дж. Росс III, технически это возможно, но довольно много набирать) написать целую программу Cocoa Touch в чистом C.
Собственно, часть кода, размещенного здесь, написанная на C, по-прежнему вызывает код objective-C:). Я не знаю, действительно ли это соответствует сценарию с оригинального плаката, когда он спросил
Можно ли создать приложение для iPhone исключительно в программировании на языке C язык?
но я согласен с тем, что, говоря вообще, и для приложения с графическим интерфейсом, вам нужно будет написать свой графический интерфейс в OpenGL (который является C).
Я думаю, что это то, что делают большинство игр, верно? Хотя я не уверен, есть ли доступ к iPhone I/O (например, сенсорный экран) в C.
И последнее, но не менее важное: ребята, которые написали код выше рок!:)